1
2
3
4
INSTALL HOOD
Lift range hood into cavity until all
four mounting brackets clip in. Check
brackets have safely engaged on the
cabinetry before releasing range hood.
Ensure power cable remains free and
unobstructed during this process.
Unclip filters to remove.
On one side of the perimeter plate,
loosen the two screws shown, and slide
perimeter plate out.
From below the rangehood, secure all
four brackets using Phillips screwdriver.
Tighten until flange is flush against
cabinetry.
5
6
Refit perimeter plate and secure using
the screws removed in step 3.
Ensure filters are oriented correctly
before clipping back into place.
15