125 mm diameter ducting adapter (1) 150 mm diameter ducting adapter (1) Expansion plug (8) 10 mm self tapping screw (4) 30 mm self tapping screw (4) Product dimensions https://producthelp.fisherpaykel.com/au/Cook/Rangehoods/Canopy/HC90PLX4/User_Guide_HC90PLX4/02_Installation_instr… Updated: Thu, 30 Jul 2020 10:51:38 GMT Powered by...
Page 3
Product dimensions for HC90PLX4 and HC90PLX4 Property (mm) HC60PLX4 HC90PLX4 min. 610 – max. min. 610 – max. A. Overall height of product 1050 1050 B. Overall width of product C. Overall depth of product D. Height of product E. Width of chimney F.
Page 4
Property (mm) HC60PLX4 HC90PLX4 G. Distance from centre of ducting outlet to back of product H. Distance from centre of ducting outlet to side of chimney I. Diameter of ducting outlet J. Distance between centre of lights K. Distance between centre of lights to back of product...
Property Size (mm) Ducted • 690 – max. 1050 Recirculation • M. Height top of cooktop to base of product min. 600 – max. 750 Electric cooktop • Gas cooktop • min. 650 – max. 750 Rangehood installation height above the cooktop is the user’s preference. Lower installation heights will improve the efficiency of capturing cooking odours, grease, and smoke.
A ducting hole is not required in the wall or ceiling if the rangehood is installed to operate with exhaust air recirculating. This product is heavy and requires two persons for installation. • Installation work and electrical wiring must be done by qualified person(s) in •...
Page 8
(see Fig. 1). Fig. 1 Fig. 2 Product dimensions for HC90PLX4 and HC90PLX4 (Continued) Property (mm) HC60PLX4 HC90PLX4 N. Lower rangehood attachment point width O. Lower rangehood attachment point height P. Upper rangehood attachment point width Q.
Page 9
Property (mm) HC60PLX4 HC90PLX4 R. Chimney bracket attachment point width S. Chimney bracket attachment point height T. Upper chimney bracket attachment point width U. Upper chimney bracket attachment point height 3. Attach the ducting adapter to the rangehood • Place the ducting adapter onto the rangehood and screw it in place using the 10 mm screws.
Page 10
4. Wall mounting • Remove the filters – pull the relative catch and tilt the filter downwards until it disengages from the supports. • Hang the rangehood off the upper rangehood mounting screws with 2 mm gap. Hang off the keyhole attachment points on the back of the rangehood then tighten the screws.
Page 11
• Extend the upper chimney and attach to the chimney bracket with 10 mm screws (C). 7. Remove packaging • Remove all packaging and protective wrappings. https://producthelp.fisherpaykel.com/au/Cook/Rangehoods/Canopy/HC90PLX4/User_Guide_HC90PLX4/02_Installation_instr… Updated: Thu, 30 Jul 2020 10:51:38 GMT Powered by...