Locking Operation Buttons; Resetting To Default; Resetting The Color Adjustments; Resetting All Adjustments To The Default Settings - Eizo Rad i Force MX215 Instructions For Use Manual

3-6. Locking Operation Buttons

The settings can be locked to prevent them being changed.
Procedure
1. Press to turn off the monitor.
2. Hold down
The "Optional Settings" menu appears.
3. Select "Key Lock" from "Optional Settings", and press
4. Select "Off", "Menu", or "All" with
Item
Off
(Default setting)
Menu
All
5. Select "Finish" with
6. Press .
The "Optional Settings" menu is closed.

3-7. Resetting to Default

There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and All
Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
●

Resetting the color adjustments

Only the color adjustment value for the currently selected mode can be reset to the default settings.
Procedure
1. Select "Color" from the Adjustment menu, and press
2. Select "Color Reset" from "Color", and press
3. Select "Execute" with
4. Press .
The color adjustments revert to the default settings.
●

Resetting all adjustments to the default settings

All settings are reset to the default settings (except the "Optional Settings" menus).
Procedure
1. Select "Tools" from the Adjustment menu, and press
2. Select "All Reset" from "Tools", and press
3. Select "Execute" with
4. Press .
All settings excluding the "Optional Settings" menus are reset to the default settings.
while pressing for at least two seconds to turn on the monitor.
or , and press
Buttons that can be locked
None (All buttons are enabled)
button
All buttons excluding
or .
"Main Default Settings" (page
or .
or .
.
.
40).
.
.
.
.
Chapter 3 Setting Monitor
23