Table of Contents
Advertisement
3-4. Locking Operation Buttons
This function allows you to lock the settings status to prevent them from being changed.
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "Key Lock" from "Optional Settings", and press
4. Choose "Off", "Menu", or "All" using
Setting
Off (Default setting)
Menu
All
5. Select "Apply" using
6. Press
.
3-5. Changing DUE (Digital Uniformity Equalizer) Setting
This product is equipped with a Digital Uniformity Equalizer (DUE) function that reduces display
unevenness. This DUE setting can be changed.
Setting
Brightness
Uniformity
Attention
• When changing the DUE setting, the monitor whose display is adjusted must be re-calibrated. Perform the target
calibration and correlation again using ColorNavigator 6. For details, refer to the ColorNavigator 6 User's Manual
(stored on the CD-ROM).
• Re-calibration is also necessary when using SelfCalibration
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "DUE Priority" from "Optional Settings", and press
4. Select "Uniformity" or "Brightness" using
5. Select "Apply" using
6. Press
.
32
Chapter 3 Setting the Monitor
down, press
for at least two seconds to turn on the monitor.
or , and press
None (All buttons are enabled)
button
All buttons excluding
or .
Prioritizes high brightness and high contrast ratio.
Prioritizes reduction of display unevenness.
down, press
for at least two seconds to turn on the monitor.
or .
.
.
Buttons that can be locked
Function
(page
34) to calibrate the screen.
.
or , and press
.
Advertisement
Table of Contents
