Using Custom Keys; Setting A Function To Custom Keys; Locking Operation Buttons - Eizo CuratOR EX4342 Installation Manual

1-3. Using Custom Keys

Execute the functions assigned to the custom keys (F1/Left, F2/Right, F3/Down and F4/Up). For
information on how to set a function to each custom key, see
5).
1.
Press F1/Left, F2/Right, F3/Down and F4/Up.
The function associated with the custom key that is pressed will run.
Note
• For dual screen display (PbyP or PinP), adjust the "Active Window" side.
●

Setting a function to custom keys

1.
Press MENU.
The Setting menu appears.
2.
Press F3/Down or F4/Up to select "Preferences", and then press ENTER.
The "Preferences" menu appears.
3.
Press F3/Down or F4/Up to select "Custom Key", and then press ENTER.
The "Custom Key" menu appears.
4.
Press F3/Down or F4/Up to select which custom key to set the function to, and
then press ENTER.
5.
Press F3/Down or F4/Up to select the function, and then press ENTER.
The selected function is assigned to the corresponding custom key.

1-4. Locking Operation Buttons

Adjusted or set states can be made unchangeable.
Procedure
1. Press the MENU and ENTER keys for at least 4 seconds.
Note
• Press the MENU and ENTER keys for at least 4 seconds to exit Key Lock.
"Setting a function to custom keys" (page
Chapter 1 Basic Adjustment / Setting
5