Table of Contents
Advertisement
2-4. Adjusting Screens
●
Digital Signal Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if
you perform more advanced adjustment, see
●
Analog Signal Input
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after
the monitor power has been turned on or the monitor has recovered from the power saving mode, and then adjust the
monitor.
• The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of 800 × 600
(SVGA).
The self adjustment and auto adjustment functions work correctly when an image is fully displayed over the Windows
or Macintosh display area. They do not work properly in the cases below:
- when an image is displayed only on a part of the screen (command prompt window, for example)
- when a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen.
Note
The self adjustment function works when all of the following conditions are satisfied:
- When a signal is input into the monitor for the first time or when a resolution or vertical/horizontal scan frequency not
used before is
If the screen is not displayed correctly even after performing the self adjustment operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
How to Set
1.
Perform the auto adjustment.
●
To adjust flickering, screen position, and screen size automatically
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Analog Adjustment" from "Screen", and press
3. Choose "Auto Adjustment" from "Analog Adjustment", and press
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing Auto Adjustment, perform the adjustments
according to the procedures on the following pages. If the screen is displayed correctly, go to
color gradation." (page
2.
Prepare to use analog screen adjustment patterns.
Download the "Screen adjustment pattern files" from our site:
Note
• For details and instructions on opening the "Screen adjustment pattern files", refer to the Readme.txt file.
"2-3. Adjusting Color" (page 13)
20).
and subsequent pages.
.
.
.
http://www.eizoglobal.com
Chapter 2 Adjusting Screens
"5. Adjusting
17
Advertisement
Table of Contents
