Screen Adjustment; Digital Signal Input; Analog Signal Input - Eizo FlexScan S2133-BK User Manual

Color lcd monitor
Table of Contents

Advertisement

2-4. Screen Adjustment

Digital Signal Input

When digital signals are input, images are displayed correctly based on the preset data of the
monitor, but if characters and / or lines appear blurred, go to
(page
23).
When performing more advanced adjustment, see
subsequent pages.

Analog Signal Input

Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on, and then adjust the monitor.
• The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of
800 × 600 (SVGA).
• The self adjustment (or automatic screen adjustment) function works correctly when an image is fully
displayed over the Windows or Macintosh display area. They do not work properly in the cases below:
- When an image is displayed only on a part of the screen (command prompt window, for example)
- When a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position
and screen size correctly according to the PC to be used.
Note
• The Self Adjust function works when all of the following conditions are satisfied:
- When a signal is input into the monitor for the first time or when a resolution or vertical / horizontal scan
frequency not used before is set
If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the
screen according to the procedures on the following pages to use the monitor comfortably.
Setting Procedures
1.
Prepare to use analog screen adjustment patterns.
Load the "EIZO LCD Utility Disk" to your PC, and then open the "Screen adjustment pattern files".
Note
• For details and instructions on opening the "Screen adjustment pattern files", refer to the Readme.txt file.
20
Chapter 2 Adjusting Screens
"To modify blurred characters / lines"
"2-3. Adjusting Color" (page 14)
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexscan s2133

Table of Contents