Feed Settings - quadient IM-22 User Manual

OPERATION
Using the touch screen

Feed Settings

The IM-22 and IM-27 letter openers are equipped with three different feed modes: Basic, On
Demand, and On Delay.
The Basic feed setting will consistently feed and count envelopes.
The On Demand feed setting will stop the belts before an envelope exits the machine. Once
the envelope is removed from the machine, the next envelope will move to the same position.
This position can be set by adjusting the demand value in mm, which adjusts the amount of
overhang the envelope has on the exit end of the feed plate. This mode can be used for feeding
into other mail processing equipment or if an operator wants to extract documents as the mail
is opened. Please note that variable speed is disabled when the On Demand feed setting is
enabled.
The On Delay feed setting will feed one envelope per set amount of time. The set amount
of time between envelopes is set in milliseconds and has a maximum value of 10,000
milliseconds (10 seconds). This mode can be used to increase counter accuracy or to allow
time for a visual inspection by an operator.
Feed Settings Page 1
Feed Settings Page 2
Feed Settings Page 3
PAGE 9