Table of Contents
Advertisement
flush water through home - check your work - send it into backwash
SYSTeM IS ReADY FOR USe
18.
Turn on gas or electric supply to the water heater(s).
PLeASe FLUSH ALL THe WATeR THROUGHOUT THe HOMe
open as many hot and cold faucets through out the home as possible,
remove the aerators or any restriction at the end of the faucets,
run tubs,
flush toilets,
dispose of any ice previously made
run water throughout home for 5 minutes.
FINAL CHeCkLIST
19.
check all connections,
pressure not to exceed 75 psi,
make sure system was not installed backwards
using the proper flexible piping
make sure drain is correctly installed and drain water was running clear.
HeLP TO PReVeNT CLOUDY OR GReY WATeR
20.
Press and hold the reGeN button until the screen turns GreeN and reads bACKWAsH 10:00
Gather up and do not forget any tools, clean up the space and leave the installation and allow the
system to flush one more time before the homeowners use the water for the first time. This will go a
long way to prevent any cloudy or grey water prior to usage.
NOTe: CLOUDY WATeR
If water appears cloudy, allow to run for several more minutes until all air is expelled or until clear.
NOTe: PRe-exISTING CONDITIONS, OLDeR HOMeS, HeAVY SeDIMeNT
If home is a year or more old, it is highly recommended that all water heaters or tankless on-demand
heaters be flushed and that all dishwashers, washers and any other water appliances be cleaned of
any existing resi due.
Please review Page 7 "Instructions Before Using" for existing plumbing and pre-existing conditions
that will effect the performance of this system.
WARNING:
Failure to follow these procedures can result in debris in the system, the system's valve, the home,
and/or filtration media being expelled. Expelled media will cause immediate short and long term
issues with the system's valve, and will enter pipes and the fixtures or appliances within the home.
Create Happy Customers
Avoid Problems
and Callbacks
16
Hide quick links:
Advertisement
Table of Contents
