Fingerprint Reader Cable; Touchpad Cable - HP ENVY x360 Maintenance And Service Manual

To replace the fingerprint reader and bracket, reverse the removal procedures.

Fingerprint reader cable

To remove the fingerprint reader cable, use this procedure and illustration.
The fingerprint reader cable is available using spare part number N41013-001.
Before removing the fingerprint reader cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fingerprint reader (see
Remove the fingerprint reader cable:
1. Release the ZIF connector (1) the fingerprint reader cable is connected to, and then disconnect the
fingerprint reader cable from the fingerprint reader.
2. Remove the fingerprint reader cable (2).
3. Remove the fingerprint reader cable.
To replace the fingerprint reader cable, reverse the removal procedures.

Touchpad cable

To remove the touchpad cable, use this procedure and illustration.
The touchpad cable is available using spare part number N09466-001.
Before removing the touchpad cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad cable:
1. Release the ZIF connector (1) the touchpad cable is connected to, and then disconnect the
touchpad cable from the system board.
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
Fingerprint reader on page
Preparation for disassembly on page
Bottom cover on page
Battery on page 31).
30).
49).
30).
30).
30).