Real-Time View And Record Fully-Radiometric Video Streaming - Fluke TiX870 User Manual

Real-time View and Record Fully-Radiometric Video Streaming

To view and record in real-time a fully-radiometric video streaming taken by the Imager on a PC via
the Fluke SmartView IR software:
1. Turn off the visible light camera on the Imager. See Settings.
2. Use the Type-C USB cable provided with the Product, connect the Imager to a PC by plugging the
Type-C end into the Type-C interface on the bottom of the Imager and the Type-A end into the
PC, as shown in Figure
3. On the PC, run SmartView IR.
4. In the upper left corner of the Main Window of the SmartView IR, click IR Camera Workspaces
and then select IR Camera1 or IR Camera2 from the pop-up menu, as shown below.
5. In the IR Camera window of the IR Camera Workspace interface, click
upper right corner.
Storage & Save
33.
Figure 33. Live Video Streaming Connection
DC Camera
Thermal Imagers
SmartViewTM IR Software
(Connect) in the
57