TiX870, TiX875, TiX880, TiX885,
TiX875U, TiX885U, TiX1060, TiX1080
Users Manual
To select a tag:
1. Tap
to enter the sub-menu for tags.
2. Tap Add and tap the text box, a soft keyboard will automatically show, and an appropriate text
input method will be applied.
3. After you input a tag, save the tag to the list. Tap the down arrow on the soft keyboard to exit the
soft keyboard.
4. Tap Done to save the tag; select the tag to be added (highlighted) and tap Done to automatically
save the tag in a thermal image file.
5. To detach the tag from an image, deselect the tag (not highlighted) and tap Done.
6. To delete a tag, select the tag (highlighted in yellow) in the tag list and tap Delete and then tap
Done.
TM
SmartView
You can use the Fluke SmartView IR software with the Imager. The software contains functions for
analyzing images, organizing data and information, and generating professional reports.
Use the SmartView IR software to:
•
Stream fully-radiometric videos
•
Create fully-radiometric videos/images
•
Analyze images
•
Plot data trends
•
Export data
•
Customize reports
Download and Install the SmartView IR Software
On the PC, go to: https://www.fluke.com/smartview-ir。
1. Download the SmartView IR software to the PC according to the instructions on the Product page.
2. On the PC, follow the instructions to install the software. (Administrator privileges are required for
the installation.)
For details on remote viewing and control of the Product connected to the SmartView IR software,
please see the instructions of the software.
Before connecting the Imager to the analysis software for PC, turn off the visible
light camera of the Imager. For details, see Settings.
56
IR Software
Note