Thermal Imagers
Image Capture
Listen to a Voice Record
The voice (audio) record replays through the speaker.
To playback an .is2 file on the SD memory card:
1. Do the steps in the Review Data Files section on page 36 to see the image
on the display.
2. Push U.
3. Push U or Y to set Audio.
4. Push U to listen to the audio.
5. Push U again to pause the audio.
Edit Data Files
Before saving a file, you can edit or modify the image.
To edit:
1. With an image in the buffer, push V to open the EDIT IMAGE
menu.
2. Push R/S to highlight Edit Image.
3. Push Y to open the EDIT IMAGE menu.
4. Push R/S to highlight an option.
5. Push U to save the changes with the file.
Save Data Files
To save an image as a data file:
1. Focus on the object of interest or inspection area.
2. Pull the trigger to capture the image. The image is now in the buffer and
you can save or edit.
3. Push U to save the image as a file and go back to the live view.
13