Import And Save Thermal Image Files - Fluke TiX870 User Manual

TiX870, TiX875, TiX880, TiX885,
TiX875U, TiX885U, TiX1060, TiX1080
Users Manual
6. In the Connect dialog box, set Camera Type to zUSB. Then click OK button.
7. Next, follow the instructions in the user manual for SmartView IR to view and record the fully-
radiometric video stream in real time.

Import and Save Thermal Image Files

To import images captured by the Imager to a PC, use the removable memory card included with the
system, or connect the Imager directly to the PC.
To transfer thermal image files to a PC using the removable memory card, use the card reader
included with the system or a universal card reader, and copy the files to the appropriate folder on the
PC.
The location of the thermal image file on the SD memory card: SD Card\00PdmIR\Gallery.
When using a card reader, you may need to install the necessary drivers. Follow the
instructions that came with the card reader.
To connect the Imager to a PC
1. Turn off the visible light camera on the Imager. See Settings.
2. Use the Type-C USB cable provided with the Product, connect the Imager to a PC by plugging the
Type-C end into the Type-C interface on the bottom of the Imager and the Type-A end into the
PC, as shown in
Operation on the PC may vary slightly depending on its operating system, but the
instructions are similar. See the specific information on the screen for operation.
3. Open File Explorer and click This PC in the left column.
4. In Devices and drives on the right side of File Explorer window, look for an icon of a multimedia
device and the name of the Image below or next to it, for example, TIX1080CN#L25, as shown
below.
5. Double click the icon.
There can be 1 or 2 mobile storage devices, for example, SD card and Internal storage, that
correspond to the external memory card and internal flash memory of the Imager, as shown
below.
58
Storage & Save
Figure 33.
Note
DC Camera
Note