Automatically Name Scanned Files; Add An Annotation; Voice Annotation - Fluke TiX870 User Manual

TiX870, TiX875, TiX880, TiX885,
TiX875U, TiX885U, TiX1060, TiX1080
Users Manual

Automatically Name Scanned Files

The thermal image files can be automatically named with the information contained in the QR code.
The files are saved in the Imager.
When the screen is frozen:
1. Tap .
2. Aim at the QR code to be scanned, the QR code information is read automatically, and a dialog
box containing the QR code information will automatically show.
3. Tap OK, the name of a thermal image file shows at the bottom of the Imager screen.
•
In IR mode, the name format of the thermal image file: IR_Date_Sequence Number_QR code
content.file format.
•
In PIP mode, the name format of the thermal image file: Mix_Date_Sequence Number_QR
code content.file format.
4. Push or tap Save, the Imager will automatically name a thermal image file with the QR code
information and save it.
The QR code used for scanning must be clear, otherwise the Imager may not be
able to read it.

Add an Annotation

You can save additional annotation with the thermal image file. Annotation can provide important
information about an image (for example, conditions and information about where the image was
captured), for reports and post-processing.
Annotation information are added to a thermal image file and can be viewed and edited both in the
Gallery and the thermal image analysis software for PC.
Adding annotation to saved thermal image files in the Gallery is similar.

Voice Annotation

You can add voice annotation to thermal image files. With this function, you can record a voice
annotation through a connected Bluetooth headset or the Imager microphone.
To add a voice annotation:
1. Tap to enter the sub-menu for voice annotation.
2. Tap to start recording. You can also tap to re-record a voice annotation which automatically
overwrites and replaces the existing annotation.
3. Tap to stop recording.
4. Tap to play the recorded voice annotation.
54
Note
Note