Fluke TiX870 User Manual page 49

Item Options
Accessibility Location Services
Sounds
Screen
brightness
Screen-off time
Auto sleep
Flashlight
HDMI
AI NUC
Eyepiece
Bluetooth Bluetooth On/Off
Headset
Temperature Select
Range
Storage & Image format
Save
SuperResolution
Visible light
camera
Table 16. Settings Menu (cont.)
Description
Enable or disable the GPS function.
The default setting is: Off
Adjust the sound volume.
The default setting is: 70 %
Adjust the screen brightness.
The default setting is: 50 %
Enable or disable the auto screen-off function and adjust the time
before screen turns off.
The default setting is: Never (The screen-off function is disabled.)
Enable or disable the auto sleep function of the Imager. If the function
is enabled, the Imager will automatically enter sleep mode after the
screen is off for 5 minutes.
The default setting is: Off.
Turn on or off the LED Flashlight function.
The default setting is: Off
Enable or disable the video streaming output of the HDMI video
interface.
The default setting is: Off
Enable or disable the AI NUC.
An external electronic eyepiece can be connected to the HDMI
interface.
Tap the Bluetooth button to enter the sub-menu for Bluetooth
connection. When Bluetooth is enabled, the button shows in yellow.
The default setting is: Off.
When Bluetooth is enabled, tap Headset, select the Bluetooth
headset that can be searched to complete the pairing of Bluetooth
devices. When the pairing is successful, "Connected" shows.
When measuring temperature, an appropriate temperature range
should be set in advance. If the displayed temperature value exceeds
the selected range, a < or > symbol shows in front of the value.
General format/State grid format
Turn on/off the SuperResolution function that can increase the pixels
of the captured thermal image by 4 times.
The default setting is: Off.
Turn on/off the visible light camera.
When the visible light camera is turned on, the current visible light
image will be saved.
The default setting is: Off.
Thermal Imagers
System Menu
45