Table of Contents
Advertisement
Introduction
1.4 Decommissioning and disposal
J30
J31
J32
J33
1.4
Decommissioning and disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated "RUGGEDCOM ROX Configuration
Manual".
Recycling and disposal
This device is low in pollutants, can be recycled, and meets the requirements of the
WEEE directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of devices at public disposal sites.
For environmentally friendly recycling and the disposal of devices, contact a certified
disposal company for electronic scrap or your Siemens contact.
For more information, refer to
view/109479891.
Note the different national regulations.
1.5
Cabling Recommendations
Before connecting the device, be aware of the recommendations and considerations
outlined in this section.
8
Option
4FG50 = 4x 1000LX SFP Blank (no transceivers) require 88Gbps Switch module
S01 = 8x RS232/RS422/RS485 via DB9
8FX50 = 8x 100FX SFP
PRP = 1x Pair (A/B) Gigabit PRP SFP Blank (no transceivers) require 88Gbps Switch
module
Description
https://support.industry.siemens.com/cs/ww/en/
RUGGEDCOM RX5000
Equipment Manual, 11/2023, C79000-G8976-1058-15
Advertisement
Table of Contents
