Parts And Accessories - Siemens SIMATIC NET RUGGEDCOM RX5000 Equipment Manual

3 POS power terminal block plug
3 POS power terminal block plug
M4 (#8) ring tongue
Braided or equivalent ground wire
CAT-5 Ethernet cables
#8-32 screws
1.7

Parts and accessories

Parts and accessories, including removable media, kits, cables, and other
components, are available through the
selector.automation.siemens.com].
Modules
Available modules are listed in the
support.industry.siemens.com/cs/ww/en/ps/21322/man].
SFP transceivers
Available SFP transceivers are listed in the
Manual
Terminal blocks
RUGGEDCOM RX5000 screw
terminal plug connector kit
RUGGEDCOM RX5000
Equipment Manual, 11/2023, C79000-G8976-1058-15
Tools
[https://support.industry.siemens.com/cs/us/en/ps/29769/man].
Component
Quantity
1
1
4
1
—
4
RUGGEDCOM Selector [https://ruggedcom-
RUGGEDCOM Modules Reference Manual [https://
RUGGEDCOM SFP Transceivers Reference
Description
Kit containing 10 screw-type
terminal blocks.
Introduction
1.7 Parts and accessories
Detail
For the failsafe alarm relay. The device
includes one screw-type terminal block
plug.
Additional plugs are also available for
purchase. For more information, refer
to "Parts and accessories" (Page 11).
For HI AC or DC power connections. The
device includes one screw-type terminal
block plug.
Additional plugs are also available for
purchase. For more information, refer
to "Parts and accessories" (Page 11).
For connecting wires to a screw-type
terminal block plug or the chassis
ground connection.
Except for the chassis ground
connection, the ring tongue must have
short insulated ring terminals with a
minimum distance of 5 mm (0.2 in)
from the ring center to the insulation.
For grounding the device to safety
Earth.
For connecting the device to the
network.
For mounting the device to a panel.
Article number
6GK6000-8HT03-0AC0
11