5.
6.
7.
8.
3.2
SFP transceivers
Media modules supported by the device feature Small Form-factor Pluggable
(SFP) transceiver sockets, which are compatible with the wide array of SFP/SFP+
transceivers available from Siemens.
Note
When more than two 40 km or 80 km SFP+ transceivers are installed, the maximum
temperature at which the device can operate will be reduced to 75 °C (165°F).
LEDs
Each socket features an LED that indicates its link state.
Green (Solid)
Green (Blinking)
Off
Compatible SFP transceivers
For more information about which SFP transceivers are compatible with the
RUGGEDCOM RX5000, as well as instructions for ordering and installation/
removal, refer to the
support.industry.siemens.com/cs/ww/en/ps/21322/man].
Note
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens
accepts no liability as a result of performance issues related in whole or in part to
third-party components.
RUGGEDCOM RX5000
Equipment Manual, 11/2023, C79000-G8976-1058-15
Tighten the screws to secure the media module.
If the new media module is of a different type than the previous module, a
system restart or reset to factory defaults may be required.
For more information, refer to the
[https://support.industry.siemens.com/cs/ww/en/ps/21322/man]
the installed software release.
[Optional] If necessary, install the device in the rack.
For control and switch modules only, connect power to the device.
State
"RUGGEDCOM SFP Transceivers Reference Manual" [https://
"RUGGEDCOM ROX Configuration Manuals"
Description
Link established
Activity
No link detected
Communication ports
3.2 SFP transceivers
associated with
35