Decommissioning And Disposal; Cabling Recommendations; Supported Fiber Optic Cables - Siemens SIMATIC NET RUGGEDCOM RS1600T Installation Manual

Ethernet switches
Table of Contents

Advertisement

Introduction
1.3 Decommissioning and Disposal
Power Supply Terminal Block
Chassis Ground Terminal
1.3

Decommissioning and Disposal

Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated "Configuration Manual".
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
1.4

Cabling Recommendations

All copper Ethernet ports on RUGGEDCOM products include transient suppression
circuitry to protect against damage from electrical transients and conform with
IEC 61850-3 and IEEE 1613 Class 1 standards. This means that during a transient
electrical event, communications errors or interruptions may occur, but recovery is
automatic.
Siemens also does not recommend using copper Ethernet ports to interface with
devices in the field across distances that could produce high levels of ground
potential rise (i.e. greater than 2500 V), during line-to-ground fault conditions.
1.4.1

Supported Fiber Optic Cables

The following fiber optic cable types are supported under the stated conditions.
4
"Connecting the Failsafe Alarm Relay" (Page 15)
"Failsafe Alarm Relay Specifications" (Page 21)
A pluggable terminal block. For more information, refer to:
"Connecting Power" (Page 11)
"Power Supply Specifications" (Page 21)
Protects the device from power surges and accumulated static
electricity. For information about grounding the device, refer to
"Connecting Power" (Page
11).
Installation Manual, 11/2022, C79000-G8976-1015-04
RUGGEDCOM RS1600T

Advertisement

Table of Contents
loading

Table of Contents