Hoover H-OVEN 500 PLUS HOC5S747INWFS User Instructions page 9

The grounding wire connected to the oven's earth terminal must be connected to the earth
terminal of the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualified electrician to check the
continuity of the power supply's earth terminal. The manufacturer accepts no responsibility for
any accidents or other problems caused by failure to connect the oven to the earth terminal or
by an earth connection that has defective continuity.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket
available so that the oven can be connected to this if it is removed from the space in which it is
installed. The power cable must only be substituted by technical service staff or by technicians
with equivalent qualifications.
Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection available from stores.
Aluminium foil or any other protection, in direct contact with the hot enamel, risks melting and
deteriorating the enamel of the insides. In order to prevent excessive dirtying of your oven and
the resulting strong smokey smells, we recommend not using the oven at very high temperature.
It is better to extend the cooking time and lower the temperature a little. In addition to the
accessories supplied with the oven, we advise you only use dishes and baking moulds resistant
to very high temperatures.
Installation
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer
is required to rectify faults arising from incorrect installation, this assistance is not covered by
the guarantee. The installation instructions for professionally qualified personnel must be
followed. Incorrect installation may cause harm or injury to people, animals or belongings. The
manufacturer cannot be held responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internal parts. Make the openings specified on last page according to the type of
fitting.
First Use
PRELIMINARY CLEANING; Clean the oven before using for the first time. Wipe over external surfaces
with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and
washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this
will remove any lingering smells of newness.
EN 9