Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
When the Open or WEP authentication type is selected, the following settings are displayed on the
page:
Parameter
Enable encryption WEP
Default key ID
Encryption key WEP as
HEX
Encryption key
(1-4)
When the WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed, WPA3-SAE, and WPA2-
PSK/WPA3-SAE mixed authentication type is selected, the following fields are displayed:
Parameter
Password PSK
Encryption type
Click the NEXT button to continue or click the BACK button to return to the previous page.
3.
For Open authentication type only.
The checkbox activating WEP encryption. When the checkbox is
the Default key ID drop-down list, the Encryption key
selected,
WEP as HEX checkbox, and four Encryption key fields are
displayed on the page.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields. Click the Show icon (
A password for WPA encryption. Click the Show icon (
display the entered password.
An encryption method: TKIP, AES, or TKIP+AES.
TKIP and TKIP+AES encryption types are not available for
WPA3-SAE and WPA2-PSK/WPA3-SAE mixed authentication
types.
Page 60 of 352
Configuring via Web-based Interface
Description
) to display the entered key.
Description
) to
Advertisement
Table of Contents
