D-Link DVG-5402G/GF User Manual page 212

DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Parameter
Path
Directory
Enable download queue
Download queue size
Peer limit
Enable download speed
limit
Use uTP
Web-based interface
port
Enable
Username
Password
After specifying the needed parameters, click the APPLY button.
Locate data of the Transmission client. To do this, click the Search
), select the needed value, and click the SELECT button.
icon (
The folder on the USB storage where data of the Transmission client
will be stored.
Move the switch to the right if you want to limit the number of
simultaneous downloads. Upon that the Download queue size
field will be displayed.
Move the switch to the left not to limit the number of simultaneous
downloads.
The maximum number of simultaneous downloads. By default, the
value 1 is specified.
The maximum number of the service users from which you can
download files.
Move the switch to the right to limit the maximum file download
speed. In the Download speed limit field displayed, specify the
maximum value of speed (KBps).
Move the switch to the left not to limit the maximum download
speed.
Move the switch to the right to enable μTP (Micro Transport
Protocol, a transport protocol for file sharing). Such a setting can
increase the load on the router.
Move the switch to the left to disable μTP.
The port on which the web-based interface of the Transmission
client is available.
Authorization
Move the switch to the right if you want the Transmission client to
request for username and password when accessing its web-based
interface. Then fill in the Username and Password fields.
The username to access the web-based interface of the Transmission
client.
The password to access the web-based interface of the Transmission
client.
Page 212 of 352
Configuring via Web-based Interface
Description