Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Parameter
Enable Call Forwarding On Busy
Disable Call Forwarding On Busy Disables call forwarding when this line is busy.
Enable Call Forwarding No
Answer
Disable Call Forwarding No
Answer
Enable Hot Line
Disable Hot Line
Local Call
Call by IP
Redial
To use the call forwarding function on the connected phone, dial the corresponding prefix, wait to
hear the signal for number dialing in the receiver, and dial the number for forwarding on the phone.
You can also configure call forwarding in the List of SIP Lines section on the Profile Name /
Basic Settings page.
Description
Enables call forwarding when this line is busy.
Enables call forwarding when this line gives no reply.
Disables call forwarding when this line gives no reply.
Enables the hotline.
Disables the hotline.
Makes a call to the neighboring line. In the Additional
parameter field, specify the number of the SFX port
for calling.
Makes an outgoing call. In the Additional parameter
field, specify a part of the IP address for calling, for
example, 192.168.100. The remaining part of the IP
address is dialed on the connected phone. Use the
star (*) key to dial the dot (.) character.
Enables number redial.
Page 287 of 352
Configuring via Web-based Interface
Advertisement
Table of Contents
