Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Parameter
MPPE40
MPPE128
Maximum number of
connections
Port
MTU
Enable debug mode
Obtain DNS server
addresses
automatically
Primary DNS/
Secondary DNS
MPPE encryption with a 40-bit or 128-bit key is applied. Select the
needed action from the drop-down list.
Auto: Allow clients to connect to the VPN server
•
automatically with MPPE encryption.
Refuse: Restrict clients from connecting to the VPN server
•
with MPPE encryption.
Require: Allow clients to connect to the VPN server only
•
with MPPE encryption.
Advanced Settings
Available on the PPTP tab.
The maximum number of devices allowed to connect to the PPTP
server.
Available on the L2TP tab.
The port of L2TP server. By default, the value 1701 is specified.
The maximum size of units transmitted by the interface.
Move the switch to the right if you want to log all data on this VPN
server debugging. Upon that the Debugging messages value
should be selected from the Level drop-down list on the System /
Log page
(see the Log section, page
DNS
Move the switch to the right to let VPN server's clients obtain DNS
server addresses of the WAN connection which is selected from the
Interface list. Upon that the Primary DNS and Secondary DNS
fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 159 of 352
Configuring via Web-based Interface
Description
329).
Advertisement
Table of Contents
