Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Creating 6rd WAN Connection
On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Parameter
Connection name
Enable connection
Ping
Obtain 6rd settings
automatically
6rd Border Relay
6rd IPv6 prefix
Figure 97. The page for creating a new 6rd connection.
General Settings
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
If the switch is moved to the right, the router responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Move the switch to the right to let the router obtain 6rd domain
settings automatically from the LAN DHCP server or from a
delegating router.
Upon that the 6rd Border Relay, 6rd IPv6 prefix, 6rd IPv6
prefix length, and IPv4 mask length fields are not available for
editing.
Enter the IPv4 address of the router
6rd domain.
The IPv6 prefix for the 6rd domain
Page 123 of 352
Configuring via Web-based Interface
Description
provided by your ISP for the
provided by your ISP.
Advertisement
Table of Contents
