Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Parameter
Enable custom
parameters
Maximal buffer
Rate management (TCF)
Maximal rate
Error correction mode
Enable spoofing
Duplicate number
Enable fax/modem
Codec type
Payload type
When all needed settings are configured, click the APPLY button.
Move the switch to the right to specify additional parameters for
T.38 protocol. Upon that the Custom Parameters T.38 section is
displayed on the page.
Custom Parameters T.38
The maximum buffer size (in bytes) for data received by the router.
From the drop-down list, select a method for facsimile data transfer
rate management: Local or Network.
From the drop-down list, select the maximum rate for facsimile data
receipt/transfer (in bauds).
Move the switch to the right to enable the error correction mode.
When the switch is moved to the right, the ECC signal and ECC
data fields are available for editing.
Move the switch to the right to let the router simulate facsimile data
receipt/transfer in case of delays.
Specify the number of packet duplications.
Fax/Modem Passthrough
From the drop-down list, select the Auto value to enable the Fax
Passthrough and Modem Passthrough mechanisms.
To disable the mechanisms, select the Disable value.
From the drop-down list, select a codec for data transfer.
Payload data type.
Page 279 of 352
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
