System lock
Activating the system lock
All sensors are locked. A set minute
minder time continues to count down.
Touch the sensor for 6 seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, will appear in the
timer display. The system lock is
switched on.
If a disallowed sensor is touched while
the system lock is activated, will
appear in the timer display for few
seconds and a buzzer will sound.
The system lock can be programmed
so that it activates automatically
5 minutes after the cooktop has been
switched off (see "Adjusting settings").
Deactivating the system lock
Touch the sensor for 6 seconds.
will appear briefly in the timer
display and then the seconds will count
down. The system lock is deactivated
once the time has elapsed.
Safety lock
Activating the safety lock
If the safety lock is activated:
- the cooking zones and the cooktop
can only be switched off
- a set minute minder time can be
modified
Touch and hold the + and sensors
at the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, will appear in the
timer display. The safety lock is
activated.
If a disallowed sensor is touched while
the safety lock is activated, will
appear in the timer display for few
seconds and a buzzer will sound.
Deactivating the safety lock
Touch and hold the + and sensors
at the same time for 6 seconds.
will appear briefly in the timer
display and then the seconds will count
down. The safety lock is deactivated
once the time has elapsed.
Operation
47
Need help?
Do you have a question about the KM 7404 FX and is the answer not in the manual?
Questions and answers