Safety Features; System Lock/Safety Lock - Miele KM 7720 FR Operating And Installation Instructions

System lock/Safety lock

Your cooktop is equipped with a system
lock and a safety lock to prevent the
cooktop and the cooking zones being
switched on or any settings being al-
tered unintentionally.
The system lock is activated when the
cooktop is switched off. If the system
lock is activated, the cooktop cannot be
switched on and the timer cannot be
used. A set timer will continue to count
down. The cooktop is programmed so
that the system lock must be activated
manually. The system lock can be pro-
grammed to be activated automatically
5 minutes after the cooktop has been
switched off (see "Programming").
The safety lock is activated while the
cooktop is switched on. When the lock
is activated, the cooktop can be oper-
ated only under certain conditions:
- The cooking zones and the cooktop
can only be switched off.
- A set kitchen timer time can be modi-
fied.
If an unavailable sensor control is
touched while the system lock or safety
lock is activated,  will appear in the
timer display for few seconds and a
tone will sound.
Activating the system lock
 Touch the  sensor control for
6 seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed,  will appear in the
timer display. The system lock is acti-
vated.
Deactivating the system lock
 Touch the  sensor control for
6 seconds.
 will appear briefly in the timer dis-
play and then the seconds will count
down. The system lock is deactivated
once the time has elapsed.
Activating the safety lock
 Touch and hold the  and  sensor
controls at the same time for 6 sec-
onds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed,  will appear in the
timer display. The safety lock is acti-
vated.
Deactivating the safety lock
 Touch and hold the  and  sensor
controls at the same time for 6 sec-
onds.
 will appear briefly in the timer dis-
play and then the seconds will count
down. Once the time has elapsed, the
safety lock function is deactivated.

Safety features

49