Download
Share
Print this page
Miele KM 7999 FL Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Cooktop
  5. KM 7999 FL
  6. Manual

Miele KM 7999 FL Manual

Hide thumbs Also See for KM 7999 FL:

Advertisement

Quick Links

Download this manual
Installation
Safety instructions for installation
Risk of damage from incorrect installation.
Incorrect installation can cause damage to the cooktop.
The cooktop must only be installed by a qualified person.
Danger of electric shock!
Incorrect connection to the power supply may result in an electric shock.
The cooktop must be connected to the power supply by a qualified electrician.
Damage from falling objects.
Take care not to damage the cooktop when fitting wall units or a rangehood
above it.
Fit the wall units and the rangehood before the cooktop.
The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material.
The cooktop must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.
After installation, ensure that nothing can come into contact with
the connection cable and that it is without hindrance.
The connection cable may not come into contact with any moving
kitchen component (e.g. a drawer) or be subject to mechanical
obstruction which could damage it.
Carefully observe the safety clearances listed on the following
pages.
11373090-01

Advertisement

loading

Related Manuals for Miele KM 7999 FL

Summary of Contents for Miele KM 7999 FL

  • Page 1 *INSTALLATION* 11373090-01 Installation Safety instructions for installation  Risk of damage from incorrect installation. Incorrect installation can cause damage to the cooktop. The cooktop must only be installed by a qualified person.  Danger of electric shock! Incorrect connection to the power supply may result in an electric shock. The cooktop must be connected to the power supply by a qualified electrician.

  • Page 2: Safety Distances

    *INSTALLATION* 11373090-01 Installation Minimum safety distance underneath Safety distances the cooktop Safety distance above the cooktop To ensure sufficient ventilation to the cooktop, a minimum distance must be left between the underside of the cooktop and any oven, interim shelf or drawer.
  • Page 3 *INSTALLATION* 11373090-01 Installation Interim shelf View from above It is not necessary to fit an interim shelf underneath the cooktop but one may be fitted if you wish. Side view a Interim shelf a Interim shelf b Cabinet rear wall b Cabinet rear wall c Minimum distance between the rear d Worktop cut-out...
  • Page 4 *INSTALLATION* 11373090-01 Installation Safety distances to the sides and Installation notes – back of the appliance surface-mounted The minimum distance shown below Seal between the cooktop and the must be maintained between the back worktop edge of the cooktop and a tall unit or wall.
  • Page 5 *INSTALLATION* 11373090-01 Installation Tiled worktop Grout lines  and the hatched area underneath the cooktop frame must be smooth and even. If they are not, the cooktop will not sit flush with the worktop and the sealing strip underneath the cooktop will not provide a good seal between the cooktop and the worktop.
  • Page 6 *INSTALLATION* 11373090-01 Installation Installation dimensions – Surface-mounted All dimensions in this instruction booklet are given in mm. Installation dimensions – KM 7999 FR a Front b Mains connection box with mains connection cable Mains connection cable L = 1280 mm c Wi-Fi stick connection...
  • Page 7 *INSTALLATION* 11373090-01 Installation Installation dimensions – KM 7999 FL a Front b Mains connection box with mains connection cable Mains connection cable L = 1280 mm c Wi-Fi stick connection...

  • Page 8: Surface-Mounted Installation

    *INSTALLATION* 11373090-01 Installation Surface-mounted installation  Create the worktop cut-out. Remember to maintain the minimum safety distances (see “Installation – Safety distances”).  Seal the cut surfaces of wooden worktops with a suitable sealant to avoid swelling caused by moisture. The sealant must be heat-resistant.
  • Page 9 *INSTALLATION* 11373090-01 Installation Natural stone worktops Installation notes – flush-fit The cooktop is placed directly in the cut-out. A flush-fit cooktop is suitable only for installation in natural stone (granite, Solid wood worktops, tiled worktops, marble), solid wood and tiled glass worktops worktops.
  • Page 10 *INSTALLATION* 11373090-01 Installation Installation dimensions – Flush-fit All dimensions in this instruction booklet are given in mm. Installation dimensions – KM 7999 FL a Front b Mains connection box with mains connection cable Mains connection cable L = 1280 mm c Stepped cut-out, natural stone worktop d Wooden strip 12 mm (not supplied) e Wi-Fi stick connection...

  • Page 11: Electrical Connection

    The connection data is quoted on the and repairs can be dangerous to data plate. Please ensure this users. information matches the household Miele cannot be held liable for mains supply. damage or injury caused by incorrect Please see the wiring diagrams for or unauthorised installation, connection.
  • Page 12 *INSTALLATION* 11373090-01 Installation Wiring diagram AC 220-240 V W i r i n g d i a g r a m Under adverse conditions of the power supply network this device can cause 2 2 0 - 2 4 0 V irritating voltage fluctuations in single Yellow/Green phase connection.