Setting Up A Direct Connection With The Rangehood - Miele KM 7404 FX Operating And Installation Instructions

Setting up a direct connection
with the rangehood
The cooktop requires max. 2 W in
networked standby.
Availability of the Wi-Fi connection
The Wi-Fi connection shares a
frequency range with other appliances
(including microwave ovens and remote
control toys). This may result in
sporadic or even complete connection
failures. Therefore, a constant
availability of featured functions cannot
be guaranteed.
Commissioning
Setting up a direct connection with
the rangehood
You will find the necessary information
for integrating the rangehood in the
relevant operating and installation
instructions.
- Miele rangehood with
Con@ctivity 3.0
- The cooktop is not integrated in
your home network (Miele@home)
 Switch the cooktop on.
 Touch the 0 and 7 sensors at the
same time for 6 seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, a progress light will
appear in the timer display during the
connection attempt. If the connection
was successful, the code : appears
in the timer display. If the connection
could not be established, the timer
display will show the code :. Repeat
the steps above.
When successfully connected, 2 and 3
will light up constantly on the
rangehood.
 Quit connection mode on the
rangehood by pressing the run-on
control .
Con@ctivity 3.0 has now been
activated.
37