Problem Solving Guide; Messages In The Display - Miele KM 7404 FX Operating And Installation Instructions

Messages in the display

Problem
In the cooking zone
display, the  symbol
lights up or flashes
alternately with the
selected power level
or .
After the cooktop has
been switched on, or
after touching a sensor,
 appears in the timer
display for a few
seconds.
After the cooktop has
been switched on, 
appears in the timer
display for a few
seconds. The cooking
zones do not heat up.

flashes in the
timer display and
the cooktop
switches off
automatically.
Possible cause and remedy
No cookware is present on the cooking zone.
Unsuitable cookware is present on the cooking zone.
The base diameter of the cookware used is too small.
Suitable cookware has been removed from the
cooking zone.
If no pan or an unsuitable pan is placed on the
cooking zone, the cooking zone will switch off
automatically after 3 minutes.
 Place a suitable item of cookware on the cooking
zone within 3 minutes.
 goes out. The cooking process is started/continued
with the previously selected settings.
 If you are using a different item of cookware and/or
food, modify the settings.
The system lock is switched on.
 Deactivate the system lock (see "Operation -
Deactivating the system lock").
The safety lock is activated.
 Deactivate the safety lock (see "Operation -
Deactivating the safety lock").
The cooktop is in demonstration mode.
 Touch the  and  sensors at the same time
until  flashes alternately with  in the timer
display.
One or more of the sensors are covered, e.g. by
finger contact, food boiling over, or an object.
 Clean off any dirt and/or remove the object (see
"Familiarising yourself with the appliance - Safety
switch-off").

Problem solving guide

59