Setting The Minute Minder For A Burner; System Lock, Minute Minder - Miele KM 3034-1 Operating And Installation Instructions

Setting the minute minder for a
burner
A minute minder can be allocated to
any burner that is switched on. This
function can be used on all burners at
the same time.
 Turn on the burner you wish to use.
 Keep touching the  sensor until the
indicator light for this burner starts to
flash.
If several burners are switched on, the
indicator lights for the cooking zones
being used will flash in an anti-
clockwise direction, starting with the
front right.
 Set the required time.
 To set a minute minder time for
another burner, follow the steps
described above.
If more than one minute minder time is
programmed, the shortest time
remaining will be displayed and the
corresponding indicator light will flash.
The other indicator lights will light up
constantly.
 If you want to show the time
remaining for another burner which is
counting down in the background,
touch the  sensor repeatedly until
the indicator light for the burner you
require flashes.
Easy switch-off function
 Touch the  sensor if you have set a
minute minder time for several
burners and want to delete them all.

System lock, minute minder

The system lock cannot be activated if
a minute minder duration has been set.
The system lock can be used to prevent
a minute minder time being switched on
by accident during cleaning.
If a sensor control is touched when
the system lock is active, the indicator
light illuminates and  appears in the
time display.
Activating
 Touch the + and - sensors until 
appears in the time display and a
tone sounds.
 will go out after a short while.
Deactivating
 Touch the + and - sensors until 
goes out in the time display and a
tone sounds.
Minute minder
31