•
The image shows the removed 75mm bowl
adapter.
•
To attach the 100mm bowl adapter, loosen all
three attached bolts using the Allen key.
•
After loosening the bolts, remove them, as
shown in the image.
•
Mount the 100mm bowl adapter on the dolly
platform.
NOTE: The Dolly offers multiple mounting op-
tions, such as a Mitchell mount, 75mm and
100mm bowl adapters, an optional 150mm
Mitchell bowl mount, and a cheese plate.
•
After mounting the bowl adapter, insert three
bolts under the Dolly and secure them by
tightening them using the Allen key.
100mm Fluid Head Assembly
•
Loosen the locking knob of the 100mm Fluid
Head
(Not Included)
bowl adapter through the screw.
•
After mounting the fluid head
on the bowl, secure it by inserting the
Conversion ring & locking knob from the
bottom side of the Dolly.
NOTE: To prevent the 75mm or 100mm or any
other fluid head from slipping through the dolly
platform's Centre hole, we use a conversion ring
to reduce the gaping of the hole size of the
dolly platform.
and insert it into the
(Not Included)
5