PROAIM CINEMA Series Assembly Manual

Hide thumbs Also See for CINEMA Series:

Flowmax Body Support, Payload: 10-25kg/22-55lb

(ST-FLMX-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

5mm, 6mm

Allen keys

Vest Bag packing

Flowmax Vest

Support Rod Bag Packing

Support rod

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the CINEMA Series and is the answer not in the manual?

Page 1 Flowmax Body Support, Payload: 10-25kg/22-55lb (ST-FLMX-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. 5mm, 6mm Allen keys Vest Bag packing...
Page 2 Flowmax Setup  Attach the Support rod into the Jacket support rod holder and tighten the knobs.  The height of the Support rod is adjustable; you can adjust it via provided Allen key as per your setup requirement. Note: A tension adjustment knob at the bottom allows changing the amount of tension of spring depending on the weight of setup while retaining stability and control.
Page 3  Loosen the knob on the hook and attach a camera / gimbal camera setup with it. YOUR PROAIM FLOWMAX BODY SUPPORT, ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.

Flowmax body supportSt-flmx-01