PROAIM CINEMA Series Assembly Manual page 4

•
After mounting the track ends onto the
C-Stand (Not Included), tighten the provided
knob to secure the setup.
•
Loosen the knob of the Centre support bar
and attach the bar below the track rail system
using a support Stand
NOTE: An 8ft track assembling has been used
for assembly here. So, for a longer track, a cen-
ter support needs to be placed in the middle of
the track.
•
Place the Polaris dolly with a 75mm bowl
adapter onto the track.
NOTE: The handles of the dolly platform should
be inside the track, as shown in the image.
Furthermore, the dolly's wheels should be
properly aligned on the track for smooth dolly
movement.
Safety Break Assembly
•
Loosen the knob to open the safety brake.
•
Mount the Safety Brake on the side of the
portable dolly platform.
•
Adjust the position of the bracket to prevent
the platform from tilting.
•
After mounting the safety brake, secure it
with a knob, as shown in the image.
Feature: It has an efficient braking system that
keeps the Dolly steady in one position.
Bowl Adapters Setup
•
The Dolly has an attached Mitchell mount
and a 75mm bowl adapter.
•
To remove the attached Mitchell mount and
75mm bowl adapter, use the 5mm Allen key
to remove the bolts.
(Not Included).
4