Centre Support Assembly
•
Insert the foot in the provided holes of the
Universal Track Ends.
•
Insert and tighten the remaining three feet in
the Track Ends, as shown in the image.
•
To form an 8ft track aluminium rail, attach
two 4ft rails.
•
To open the clamp of the Track Ends, loosen
its knob per your requirement.
•
Now, insert a track rail into the clamp, as
shown in the image.
•
After properly inserting the track rail into the
clamp, secure it by tightening the knob.
•
To mount the universal track end on a
C-Stand
(Not
Included), loosen the knob.
NOTE: To achieve shots at higher heights, one
can mount the track end on C-Stands
(Not Included).
3