PROAIM CINEMA Series Assembly Manual

Flyking mitchell slider

Hide thumbs Also See for CINEMA Series:

Flyking Mitchell Slider

(SL-FLKM)

A s s e m b l y M a n u a l

Available Sizes: 2ft, 3ft, 4ft and 6ft

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Crossbar

Flyking Mitchell Mount Camera Slider

Feet

Flight Case

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the CINEMA Series and is the answer not in the manual?

Page 1 Flyking Mitchell Slider (SL-FLKM) A s s e m b l y M a n u a l Available Sizes: 2ft, 3ft, 4ft and 6ft What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 For 360° Rotation of Slider, loosen black knob as shown in image.  Now affix your Mitchell Mount Fluid Head (Not Included) on Slider for mounting camera setup, and secure it properly. YOUR PROAIM FLYKING MITCHELL CAMERA SLIDER ALL DRESSED UP AND READY TO GO!
Page 3 Flyking Slider on any Tripod Stand - Setup NOTE: Mount the Slider on any stand with 3/8”-16 thread.  Attach Quick Release Plate of Tripod Head with 3/8”-16 thread, onto the end foots of Slider.  Now mount the Slider on Tripod Head and lock it properly to ensure a secure connection.
Page 4  Loosen red knob at End Feet to adjust the height, according to your setup requirement. YOUR PROAIM FLYKING MITCHELL CAMERA SLIDER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.

Sl-flkm