Viewing Measurements And Settings - Keysight N77 Series N7711A User Manual

1
Getting Started

Viewing Measurements and Settings

40
– Make sure both DHCP and Auto IP are not selected.
– You can now edit the IP parameters.
5 For instruments you use regularly, you can add a link on your
desktop by putting a check mark in the box to "Place a shortcut on
the Desktop".
6 Click on the "OK" button to finish the connection.
The settings and readings of the instrument can be accessed directly
from the main Viewer panel. Instruments with multiple channels have
a tab for each channel. In addition, separate windows can be opened for
simply viewing the settings and readings, as follows:
Viewing the measurement on a single channel
1 Click on the "New" button to open a window with the current
measurement and parameter settings.
Figure 27 Viewing the measurement on a single channel attenuator/power
meter (left) or tunable laser (right)
Keysight N77xx Series