Operating Environment; Line Power Requirements; Initial Safety Information For Tunable Laser Modules - Keysight N77 Series N7711A User Manual

Operating Environment

W A R N I N G

Line Power Requirements

C A U T I O N

Initial Safety Information for Tunable Laser Modules

Keysight N77xx Series
The instrument is not designed for outdoor use. To prevent potential fire or shock
hazard, do not expose the instrument to rain or other excessive moisture.
The instrument complies with installation category II and can operate from the
single-phase AC power source that supplies between 100 V and 240 V at a frequency
in the range 50 to 60 Hz. The maximum voltage fluctuation is 10% of the nominal
supply voltage. The maximum power consumption is 60 VA with all options installed.
The laser sources specified by this user guide are classified according
to IEC 60825-1 (2007). The laser sources comply with 21 CFR
1040.10 except for deviations pursuant to Laser Notice No. 50 dated
2007-June-24.
Table 1
Laser Type
Wavelength range
Max. CW output power*
Beam waist diameter
Keysight N7711A,
N7714A, N7721A, N7722A
Options 110, 111, 210, 211,
222, 240
ECL-Laser InGaAsP
1527nm-1566nm
50 mW
9 µm
1
Getting Started
Keysight N7711A,
N7714A, N7721A, N7722A
Options 101, 111, 201, 211,
222, 204
ECL-Laser InGaAsP
1570nm-1609nm
50 mW
9 µm
11