Remote Controller - C-Fly FAITH 2 User Manual

12
I Product Overview Remote Controller I
13
Note
• Adult supervision is needed when the drone is charging. Batteries are only to be charged under adult
supervision.
• Do not short circuit and squeeze the battery to avoid explosion.
• The battery should not be short-circuited, decomposed or put into the fire; and the battery should not
be placed in high temperature and heated places (such as in the fire or near the electric heating device)
• The model can only use the recommended charger. Regular checks should be made to check whether
the charger' s wires, plugs, housing and other components are damaged. When damaged, the charger
should be stopped using until repaired.
• Charger is not a toy; charger can only be used indoors.
• After the flight, the battery needs to be charged before storing. If not using it, it is recommended to
charge the battery at least once a month to avoid permanent battery damage due to excessive discharge.
• Only 5V USB power adapters that meet local laws and regulations can be used.
=_h And Dt ill ial=.111._
The propellers are pre-installed in the package. If the propeller is damaged during using, please replace the
propellers according to the following steps:
1. Use the screwdriver in the package to rotate
clockwise Twist in 2 screws
2. Attach complete.
Remote Controller
This section describes the features of the
remote controller and includes instructions for
controlling the aircraft and the camera.
1. Use the screwdriver in the package to press the
screw counterclockwise Twist 2 screws out
2. Detach complete
Note
• lithe propeller with the A-mark is to be disassembled, choose the propeller with the A-mark for installa-
tion. If the propeller marked with B-mark is removed, Just choose the propeller with B-mark to install
• Make sure that the propeller A and propeller B are installed in the correct positions. The drone will fail to
fly normally if the propellers are installed improperly.
• As the propellers are thin, be careful when installing them to prevent accidental scratches.
• Please use the official dedicated propellers for replacement.
• Propellers are consumables. Please purchase the official dedicated propellers if necessary.
Copyright © C-Fly all rights reserved Copyright © C-Fly all rights reserved
12
I Product Overview Remote Controller I
13
Note
• Adult supervision is needed when the drone is charging. Batteries are only to be charged under adult
supervision.
• Do not short circuit and squeeze the battery to avoid explosion.
• The battery should not be short-circuited, decomposed or put into the fire; and the battery should not
be placed in high temperature and heated places (such as in the fire or near the electric heating device)
• The model can only use the recommended charger. Regular checks should be made to check whether
the charger' s wires, plugs, housing and other components are damaged. When damaged, the charger
should be stopped using until repaired.
• Charger is not a toy; charger can only be used indoors.
• After the flight, the battery needs to be charged before storing. If not using it, it is recommended to
charge the battery at least once a month to avoid permanent battery damage due to excessive discharge.
• Only 5V USB power adapters that meet local laws and regulations can be used.
=_h And Dt ill ial=.111._
The propellers are pre-installed in the package. If the propeller is damaged during using, please replace the
propellers according to the following steps:
1. Use the screwdriver in the package to rotate
clockwise Twist in 2 screws
2. Attach complete.
Remote Controller
This section describes the features of the
remote controller and includes instructions for
controlling the aircraft and the camera.
1. Use the screwdriver in the package to press the
screw counterclockwise Twist 2 screws out
2. Detach complete
Note
• lithe propeller with the A-mark is to be disassembled, choose the propeller with the A-mark for installa-
tion. If the propeller marked with B-mark is removed, Just choose the propeller with B-mark to install
• Make sure that the propeller A and propeller B are installed in the correct positions. The drone will fail to
fly normally if the propellers are installed improperly.
• As the propellers are thin, be careful when installing them to prevent accidental scratches.
• Please use the official dedicated propellers for replacement.
• Propellers are consumables. Please purchase the official dedicated propellers if necessary.
Copyright © C-Fly all rights reserved Copyright © C-Fly all rights reserved