Remote Controller Status Indicator; Vision Position System - C-Fly FAITH 2 User Manual

a 0 0 0
08 I Product Overview Product Overview I 09
Remote Controller Status Indicator
a. Flight Mode Indicato
Solid green light GPS mode
Solid red light Attitude Mode
b. Power Indicator -- LED
Flashing green light during
Solidgreen light during charging
Solid green light
Green light flashes slowly
Green light flashes doubly
charging
Charging complete
The remote controller is working normally
Low battery alarm; please charge
The remote controller is idle for more than
9 minutes after power-on; the prompt
disappears automatically once operate
N/A
N/A
N/A
B-B-B...
B-B-B...
Consisted by ultrasonic sensor and camera , The vision system is composed by vision sensor and
ultrasonic sensor, The position information of drone can be obtained by vision sensor, and the current
height can be judged by the ultrasonic sensor, so that the precise positioning and safe flight of drone can
be ensured.
Vision Positioning System
The Vision Positioning System is typically used in indoor environment when GPS is weak or
unavailable. It works best when the drone altitude is less than 3 meters.
Note
The precision of the vision system is easily affected by the light strength and features of the surface
textures. It would happen if the ultrasonic sensor could not work normally to detect the altitude when it is
flying over objects that is made by sound-absorbing materials. Once the vision sensor and ultrasonic
sensor are both not available, drone will switch to altitude mode automatically. Be cautious to operate the
drone in the following situation.
• Fly fast at an altitude below 0.5m.
• Fly over monochrome surfaces (like pure black, pure red, pure red and pure green).
• Fly over strong light reflective surfaces or surfaces prone to reflection.
• Fly over water or transparent object surfaces.
• Fly over moving object surfaces (such as crowds, swaying juggles and glass).
Copyright © C-Fly all rights reserved Copyright © C-Fly all rights reserved
a 0 0 0
08 I Product Overview Product Overview I 09
Remote Controller Status Indicator
a. Flight Mode Indicato
Solid green light GPS mode
Solid red light Attitude Mode
b. Power Indicator -- LED
Flashing green light during
Solidgreen light during charging
Solid green light
Green light flashes slowly
Green light flashes doubly
charging
Charging complete
The remote controller is working normally
Low battery alarm; please charge
The remote controller is idle for more than
9 minutes after power-on; the prompt
disappears automatically once operate
N/A
N/A
N/A
B-B-B...
B-B-B...
Consisted by ultrasonic sensor and camera , The vision system is composed by vision sensor and
ultrasonic sensor, The position information of drone can be obtained by vision sensor, and the current
height can be judged by the ultrasonic sensor, so that the precise positioning and safe flight of drone can
be ensured.
Vision Positioning System
The Vision Positioning System is typically used in indoor environment when GPS is weak or
unavailable. It works best when the drone altitude is less than 3 meters.
Note
The precision of the vision system is easily affected by the light strength and features of the surface
textures. It would happen if the ultrasonic sensor could not work normally to detect the altitude when it is
flying over objects that is made by sound-absorbing materials. Once the vision sensor and ultrasonic
sensor are both not available, drone will switch to altitude mode automatically. Be cautious to operate the
drone in the following situation.
• Fly fast at an altitude below 0.5m.
• Fly over monochrome surfaces (like pure black, pure red, pure red and pure green).
• Fly over strong light reflective surfaces or surfaces prone to reflection.
• Fly over water or transparent object surfaces.
• Fly over moving object surfaces (such as crowds, swaying juggles and glass).
Copyright © C-Fly all rights reserved Copyright © C-Fly all rights reserved