Throttle Control Stick Mode; Download App - C-Fly FAITH 2 User Manual

IIE
A.B
Mode 1
Forward
Left Rotation
Backward
Ascend
Right
Descend
Right Rotation Left
Mode 2(Default setting)
Ascend
Left Rotation
Descend
Forward
Right Rotation
Backward
411111 111116.......
Right Rotation Left
18 I Remote Controller Remote Controller I 19
Throttle Control Stick Mo
Mode 2/ Mode 1 Switch
• Switch to Mode 2 (Default setting)
Before turning on, pull the left joystick to the lowest position, press the buttons "Q " and " (5" at the
same time, and keep still, wait for the remote control to make a beep and the two green lights are on to
complete successfully. Switch to "mode 2 ",user can use it after restarting the remote controller.
• Switch to Mode 1
Before turning on, pull the right joystick to the lowest position, press the buttons "cm
"
and " (!) " at the
same time, and keep still, wait for the remote control to make a beep and the two green lights are on to
complete successfully. Switch to "mode 1 ",user can use it after restarting the remote controller.
Mounting the Phone Holder
/-- ( P
C1).
6
1. Embed the phone holder into 2. Mount the phone to the phone 3. Adjust until the phone is
the remote controller stand holder. fixedly mounted.
Download APP
Be sure to connect the APP before flying the drone. User can control the
flight, operate thegimbal / camera and set flight parameters of the drone via
the APR
Scan the QR code to download app
• Please make sure that the mobile software environment is Android 5.0 or
above and IOS 9.0 or above,otherwise the APP may not be installed success-
fully or may work with errors.
Copyright © C-Fly all rights reserved Copyright © C-Fly all rights reserved
IIE
A.B
Mode 1
Forward
Left Rotation
Backward
Ascend
Right
Descend
Right Rotation Left
Mode 2(Default setting)
Ascend
Left Rotation
Descend
Forward
Right Rotation
Backward
411111 111116.......
Right Rotation Left
18 I Remote Controller Remote Controller I 19
Throttle Control Stick Mo
Mode 2/ Mode 1 Switch
• Switch to Mode 2 (Default setting)
Before turning on, pull the left joystick to the lowest position, press the buttons "Q " and " (5" at the
same time, and keep still, wait for the remote control to make a beep and the two green lights are on to
complete successfully. Switch to "mode 2 ",user can use it after restarting the remote controller.
• Switch to Mode 1
Before turning on, pull the right joystick to the lowest position, press the buttons "cm
"
and " (!) " at the
same time, and keep still, wait for the remote control to make a beep and the two green lights are on to
complete successfully. Switch to "mode 1 ",user can use it after restarting the remote controller.
Mounting the Phone Holder
/-- ( P
C1).
6
1. Embed the phone holder into 2. Mount the phone to the phone 3. Adjust until the phone is
the remote controller stand holder. fixedly mounted.
Download APP
Be sure to connect the APP before flying the drone. User can control the
flight, operate thegimbal / camera and set flight parameters of the drone via
the APR
Scan the QR code to download app
• Please make sure that the mobile software environment is Android 5.0 or
above and IOS 9.0 or above,otherwise the APP may not be installed success-
fully or may work with errors.
Copyright © C-Fly all rights reserved Copyright © C-Fly all rights reserved