WAGNER TempSpray-H126 Operating Manual page 22

EN
TABLE OF CONTENTS
Table of Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 23
1.1 Flash point _________________________________ 23
1.2 Explosion protection _________________________ 23
1.3 Danger of explosion and fire from sources of ignition
during spraying work ________________________ 23
1.4 Electric charge (spark and flame formation) ______ 23
1.5 Earthing of the object ________________________ 23
1.6 Protective earthing of the heating hose _________ 23
1.7 Use of units on building sites and workshops _____ 23
1.8 High pressure hose __________________________ 23
1.9 Personal protection while hot spraying _________ 24
1.10 Cleaning the unit ___________________________ 24
1.11 Cleaning the unit with solvents ________________ 24
1.12 Work or repairs at the electrical equipment ______ 24
1.13 Work at electrical components _________________ 24
1.14 Max. operating pressure ______________________ 24
1.15 Setting ____________________________________ 24
2 OVERVIEW OF APPLICATION ________________ 25
2.1 Range of application _________________________ 25
2.2 Coating material ____________________________ 25
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 25
3 DESCRIPTION OF UNIT _____________________ 25
3.1 General function of the devices ________________ 25
3.2 Explanatory diagram _________________________ 26
3.3 Transport __________________________________ 27
3.4 Technical data TempSpray-H326 _______________ 28
3.5 Technical data TempSpray-H226 _______________ 28
3.6 Technical data TempSpray-H126 _______________ 29
4 STARTUP _________________________________ 30
4.1 TempSpray-H326 and TempSpray-H226 _________ 30
4.1.1 Connection to the mains network ______________ 30
4.1.2 Cleaning preserving agent when starting-up of
operation initially ___________________________ 30
4.2 TempSpray-H126 ___________________________ 31
4.2.1 Connection to the mains network ______________ 31
4.2.2 Cleaning preserving agent when starting-up of
operation initially ___________________________ 31
4.3 Switch-on __________________________________ 32
4.4 Temperature adjustment _____________________ 32
22
TempSpray-H326 / -H226 / -H126
5 HANDLING THE HIGH-PRESSURE HOSE _______ 33
6 INTERRUPTION OF WORK ___________________ 33
7 CLEANING THE DEVICE _____________________ 33
7.1 Cleaning the unit from the outside _____________ 33
8 SERVICING ________________________________ 34
8.1 General servicing ___________________________ 34
9 REPAIRS AT THE UNIT ______________________ 34
9.1 Remedy in case of faults ______________________ 35
10 SPARE PARTS AND ACCESSORIES ____________ 36
10.1 Accessories TempSpray _______________________ 36
10.2 Overview of TempSpray versions and spray packs _ 36
10.3 Spare parts list TempSpray-H326 / -H226 ________ 37
Testing of the unit ________________________________ 38
Important information on product liability_____________ 38
Note on disposal __________________________________ 38
Guarantee declaration _____________________________ 38
CE - declaration___________________________________ 38
European service network __________________________ 76