WAGNER TempSpray-H126 Operating Manual page 21

TempSpray-H326 / -H226 / -H126
Airless units develop extremely high spray pressures.
The grounding of the heating-hose has to be ensured at all times.
1
Attention must be given during operation with inflammable materials-> the device is not
explosion-proof.
The following points are to be observed in accordance with the operating manual before
2
every start-up:
1. Faulty units may not be used.
2. Ensure earthing:
3. Check the permissible operating pressure of the high-pressure hose and spray gun.
4. Check all the connecting parts for leaks
5. Use personal protective equipment (e.g. gloves, if necessary).
Instructions for regular cleaning and maintenance of the unit are to be observed strictly.
3
Observe the following rules before any work on the unit and at every working break:
1. Relieve the pressure from the spray gun and high-pressure hose.
2. Secure a Wagner spray gun with the securing lever at the trigger guard
3. Switch the unit off.
Translation of the original operating instructions
WARNING!
Attention, danger of injury by injection!
Ensure safety!
EN
21