Checking The Brake Linings Of The Rear Brake - KTM 50 SX 2022 Owner's Manual

12 BRAKE SYSTEM
12.14
82
H01654-10

Checking the brake linings of the rear brake

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
F02204-10
700491-01
–
Add brake fluid up to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the washer and membrane.
–
Mount and tighten the screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Remove the motorcycle from the lift stand. (
(50 SX, FACTORY EDITION)
–
Check the brake linings for minimum thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the brake lingings of the rear brake.
( p. 83)
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the brake lingings of the rear brake.
( p. 83)
(50 SX MINI)
–
Check the brake linings for minimum thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the brake lingings of the rear brake.
( p. 83)
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the brake lingings of the rear brake.
( p. 83)
A
.
10 mm (0.39 in)
p. 134)
p. 40)
A
≥ 1 mm (≥ 0.04 in)
A
A
≥ 1 mm (≥ 0.04 in)
A
.
.