Table of Contents
Advertisement
Initial setup
The first time you power on the display, you will be guided through a series of setup screens.
Follow the on-screen instructions or the steps below to start up your display and complete the
initial setup.
1. Turn on the display. Wait for the display to boot up with the BenQ screen. This may take a
moment.
2. Follow the on-screen instructions to set up the language, date and time, and network. Or
your can skip some of these steps and complete the setup later.
OSD settings
Use one of the following methods to enter the OSD menu:
• Press
on the remote control.
• Drag the OSD menu up from the bottom-center of the screen.
See
Menu operations on page 24
for more information on the OSD menus and their settings.
16
Advertisement
Table of Contents
