Table of Contents
Advertisement
Installing and connecting the device
3.2 Mounting the device
Risk of physical injury
The device is too heavy to be mounted exclusively with the 19-inch brackets of the front
panel.
The device may fall down, injure people and get damaged.
• Secure the device using additional measures. The mounting screws of the telescopic rails
• Use the brackets on the front panel to carry and lift the unit.
Mounting holes
Detailed information on the position of the mounting holes for angle brackets or telescopic
rails can be found here: Dimension drawing of the telescope rails (Page 88) and Technical
specifications of the telescopic rails (Page 82).
The figure below shows the position of the mounting holes for angle brackets or telescopic
rails.
①
36
CAUTION
may not protrude more than 5 mm into the device.
Threaded holes for 3A68-508APZZ3CEB 84H341300 telescopic rails from the
company KING SLIDE WORKS CO., LTD or other telescopic rails match the dimensional
and technical requirements.
Operating Instructions, 03/2023, A5E52332059-AA
SIMATIC IPC RW-543A
Advertisement
Table of Contents
