Table of Contents
Advertisement
Name Edit:
To edit the name of the current product
press the Edit / Enter Preset Name bar and
a typewriter keyboard will appear. The
cursor will be at the end of the name. To
change the name press the BACK button
and the cursor will delete the name one
letter each time the BACK button is
pressed.
Delete the letters until you get to the place
where you want to start making the change.
To get the numbers and symbols to come
up press the Symbol key.
When you have completed entering the
changed name press the ENTER key.
Position Edit:
To change the position of this item on the
menu list, press the Edit / Enter Preset
Number bar and a number pad will appear.
Enter the number of the position you want
this item to appear at then press the ENTER
key.
Time & Temperature Edit:
To edit this feature press the button and a
number pad will appear. Enter the desired
cooking temperature or time and press the
ENTER button. If a number is entered and
the ENTRY button is not pressed within 30
seconds the number pad will disappear and
no changes will be saved.
Comp On / Off:
This button toggles Auto Comp on or off.
Active:
This button allows the item to be shown in
the preset menu list of the Cook Tab. If the
button says Yes the item appears on the list
if No it does not.
You can quickly tell when a product is not
active because the name and number of the
item will be grayed out.
Menu Transfer:
The Smart Touch control allows a revised
menu to be transported from one fryer to
other fryers which also have a Smart Touch
control. This is done from the Preset tab
using the Load Menu and Export Menu
buttons along the top of the display.
Load menu:
Menu changes that have been downloaded
to a flash drive can be loaded onto fryer.
Plug the flash drive into the USB port in the
front panel above the control panel. Press
the Load Menu button on the Preset menu
display.
When the display appears there may be
more than one menu. Press the bar for the
menu you want loaded and a "Loading
Menu..." box will appear with a progress
bar.
When the menu is loaded a box will appear
saying "Menu Loaded". Press the OK but-
ton and the Preset display will appear.
Remove the flash drive from the USB port.
Export menu:
When you make changes to the menu on
one fryer and want to put the same menu
on other fryers with the Smart Touch Con-
trol you can export the revised menu from
this fryer to the flash drive and load it onto
the other fryers.
Plug the flash drive into the USB port in the
front panel above the control panel. Press
the Export Menu button on the Preset menu
display.
Press the Export Menu button once and the
control will ask you for a filename. Press the
Enter Menu File Name bar and a keyboard
will appear. Enter a name you will recognize
then press the ENTER Button.
6-10
broaster.com Manual #21469 621 rev 11/23
Advertisement
Table of Contents
