Pre-Cooking Preparation; O-Ring Lubrication; Cover Check; Cooking Oil - Broaster E 24 Series Operation Manual

Pressure fryer
Table of Contents

Advertisement

O-RING LUBRICATION

Lubricate oil reservoir riser line O-ring and
cover O-ring with cooking oil (see COVER
instructions one through three under
CLEANING).

COVER CHECK

Never use force to OPEN
cover. OPEN only when no
pressure is present in the cooking well.
TO OPEN: Push down on cover handle
then rotate handle clockwise. After cover
handle is fully at the open position, push the
top half of either the LH or RH cover lift
switch to raise the cover.
TO CLOSE: Push and hold the bottom half
of both cover lift switches simultaneously to
lower cover onto latch pins.
If cover does not move up or down, turn the
power off. DO NOT operate unit until it has
been serviced by an authorized Broaster
Company representative.

5 - PRE-COOKING PREPARATION

broaster.com Manual #21469 6/21 Rev11/23

COOKING OIL

The words "oil" and "shortening" are used
to describe a high quality cooking medium
manufactured for deep frying.
Liquid Oil:
®
Use Broaster
liquid oil manufactured for deep frying.
5-1
Check oil level before
turning power switch on.
Use care when handling
HOT OIL. Oil could splash
causing serious burns.
liquid oils or a high quality

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es24Es24g160018002400

Table of Contents